Comprehensive Gold Full Body Checkup with Smart Report near me in Ahmedabad

The Total Iron Binding Capacity test measures the ability of your blood to bind and transport iron, and therefore reflects your body's iron stores. TIBC correlates with the amount of transferrin, a protein, in your blood, that helps bind iron and facilitates its transportation in the blood. Usually, about one-third of the transferrin measured is being used to transport iron, and this is called transferrin saturation.

An Iron, Serum test determines iron levels in the blood and can help diagnose conditions like anemia, or iron overload in the body. People usually suffer from low iron levels in the blood if they prefer a diet that has low iron content, or if their body has trouble absorbing the iron from the foods or supplements they intake. Low iron levels can also occur due to intense blood loss or even during pregnancy. Similarly, an excess amount of iron in the blood can occur due to over-intake of iron supplements, blood transfusions, or if you are suffering from a condition called hemochromatosis (a rare genetic disorder that causes too much iron to build up in the body or cause problems in the body to remove excess iron). 

Therefore, doctors often suggest an Iron, Serum to help check the status of your iron level, get valuable information about your nutritional well-being, detect potential health issues (if any), and take timely preventive measures.

An Unsaturated Iron Binding Capacity test determines the reserve capacity of transferrin, i.e., the portion not yet saturated with iron. The iron-binding capacity of our body can be segregated into two parts – Total Iron Binding Capacity (TIBC) and Unsaturated Iron Binding Capacity (UIBC). UIBC refers to the capacity of transferrin, a protein that transports iron, to bind with additional iron. In easy terms, it represents the available "slots" on transferrin to carry iron molecules. Unlike iron saturation, which assesses the occupied slots, UIBC measures the unoccupied ones.

The Transferrin Saturation test determines an individual’s iron status by using the ratio of serum iron concentration and total iron binding capacity (TIBC) as a percentage. The test tells us how much iron in the blood is bound to transferrin, the main protein in the blood that binds to iron and transports it throughout the body. Under normal conditions, transferrin is one-third saturated with iron, so about two-thirds of its capacity is held in reserve. This test is often employed alongside others to evaluate iron levels and diagnose conditions like iron deficiency anemia if transferrin saturation is low or hemochromatosis (an iron overload disorder) if transferrin saturation is higher than normal.

The Vitamin B12 test measures your vitamin B12 levels. Vitamin B12 is essential for various health aspects, such as maintaining a healthy nervous system, making red blood cells, and creating the genetic material of our cells. Low vitamin B12 levels are more likely to occur in older adults, children, vegans, vegetarians, people with diabetes, individuals who underwent gastric bypass surgery, women who are breastfeeding, and in conditions that impact absorption of this vitamin, like Crohn’s disease. Higher vitamin B12 levels seen in pateint on vitamin suplement does not need treatment as excessive vitamin B12 is usually removed through the urine. However, some conditions, such as liver diseases and myeloproliferative disorders, can cause an increase in vitamin B12 levels, thereby affecting blood cell production.

The Vitamin B 9 test analyzes the levels of vitamin B9 in the blood. Vitamin B9 is a part of the B complex of vitamins and is an essential nutrient, meaning the body cannot produce it and has to be taken into the diet. Folate is the naturally occurring form of vitamin B9, whereas folic acid refers to a supplement that is added to food and drinks. The deficiency of vitamin B9 (folic acid) can also lead to macrocytic anemia in which the size of the RBCs becomes larger than normal.

The Vitamin D (25-Hydroxy) test measures the levels of vitamin D in the body. It is an essential nutrient that can be synthesized in the body upon healthy exposure to sunlight or absorbed from dietary sources. It majorly exists in two forms: Vitamin D2 (ergocalciferol) and Vitamin D3 (cholecalciferol). Vitamin D2 is present in plants, such as yeast or mushrooms, and is available as a supplement in fortified foods, and vitamin D3 is found in foods like cheese, green vegetables, mushrooms, egg yolks, and fatty fish.

Both forms of vitamin D (D2 and D3) need to undergo some chemical changes before being available for use in the body. These chemical changes take place in the liver or kidneys.The levels of 25-hydroxy Vitamin D in blood is considered the best parameter to assess vitamin D status of the body. A Vitamin D (25-Hydroxy) measures the level of Total 25-OH vitamin D (D2+D3) , but it does not differentiate between the two forms as it is the major form of vitamin D that circulates in the blood.

An HbA1c (Hemoglobin A1c) test precisely measures the percentage of sugar-coated or glycated hemoglobin in your blood. The test results represent the proportion of hemoglobin in your blood that has been glycated. 

Hemoglobin, a vital protein found in red blood cells, is responsible for transporting oxygen throughout the body. Hemoglobin A is the most abundant form of hemoglobin, and when blood sugar levels increase, a higher proportion of hemoglobin A becomes glycated. As red blood cells have a lifespan of approximately 120 days, the sugar molecules remain attached to the hemoglobin for the duration of the cell's life. Consequently, the HbA1c test offers insight into your average blood sugar levels over the past 8 to 12 weeks. 

A fasting blood sugar test measures the glucose level in the body under overnight fasting conditions. Glucose serves as the body's energy currency and is broken down through metabolism to produce energy. Hormones and enzymes produced by the liver and pancreas control this process. The hormone insulin, produced by the pancreas, regulates blood glucose levels. When these levels are high, such as after a meal, insulin is secreted to transport glucose into cells for energy production. Elevated glucose levels in the body after fasting may indicate a risk of developing prediabetes or diabetes, which can be of two types- Type 1, caused by little or no insulin production, and Type 2, caused by insulin resistance or decreased insulin production.

There are five types of WBCs: neutrophils, lymphocytes, monocytes, eosinophils, and basophils. A Differential Leukocyte Count test measures the percentage of each type of WBC in the blood. Leukocytes or WBCs are produced in the bone marrow and defend the body against infections and diseases. Each type of WBC plays a unique role to protect against infections and is present in different numbers.

This further contains

• Differential Monocyte Count
• Differential Basophil Count
• Differential Eosinophil Count
• Differential Neutrophil Count
• Differential Lymphocyte Count

The Red Blood Cell Count test measures the total number of red blood cells in your blood. RBCs are the most abundant cells in the blood with an average lifespan of 120 days. These cells are produced in the bone marrow and destroyed in the spleen or liver. Their primary function is to help carry oxygen from the lungs to different body parts. The normal range of RBC count can vary depending on age, gender, and the equipment and methods used for testing.

An Hb (Hemoglobin) test measures the concentration of hemoglobin protein in your blood. Hemoglobin is made up of iron and globulin proteins. It is an essential part of RBCs and is critical for oxygen transfer from the lungs to all body tissues. Most blood cells, including RBCs, are produced regularly in your bone marrow. The Hb test is a fundamental part of a complete blood count (CBC) and is used to monitor blood health, diagnose various blood disorders, and assess your response to treatments if needed.

The Platelet Count test measures the average number of platelets in the blood. Platelets are disk-shaped tiny cells originating from large cells known as megakaryocytes, which are found in the bone marrow. After the platelets are formed, they are released into the blood circulation. Their average life span is 7-10 days. 

Platelets help stop the bleeding, whenever there is an injury or trauma to a tissue or blood vessel, by adhering and accumulating at the injury site and releasing chemical compounds that stimulate the gathering of more platelets. A loose platelet plug is formed at the site of injury and this process is known as primary hemostasis. These activated platelets support the coagulation pathway that involves a series of steps, including the sequential activation of clotting factors; this process is known as secondary hemostasis. After this step, there is a formation of fibrin strands that form a mesh incorporated into and around the platelet plug. This mesh strengthens and stabilizes the blood clot so that it remains in place until the injury heals. After healing, other factors come into play and break the clot down so that it gets removed. In case the platelets are not sufficient in number or not functioning properly, a stable clot might not form. These unstable clots can result in an increased risk of excessive bleeding. 

The Total Leukocyte Count test measures the numbers of all types of leukocytes, namely neutrophil, lymphocyte, monocyte, eosinophil, and basophil, in your blood. Leukocytes or WBCs are an essential part of our immune system. These cells are produced in the bone marrow and defend the body against infections and diseases. Each type of WBC plays a unique role to protect against infections and is present in different numbers.

The Hematocrit test measures the proportion of red blood cells (RBCs) in your blood as a percentage of the total blood volume. It is a crucial part of a complete blood count (CBC) and helps in assessing your blood health. RBCs are responsible for carrying oxygen from the lungs to different parts of the body. The hematocrit test provides valuable information about your blood's oxygen-carrying capacity.

Higher-than-normal amounts of RBCs produced by the bone marrow can cause the hematocrit to increase, leading to increased blood density and slow blood flow. On the other hand, lower-than-normal hematocrit can be caused by low production of RBCs, reduced lifespan of RBCs in circulation, or excessive bleeding, leading to a reduced amount of oxygen being transported by RBCs. Monitoring your hematocrit levels is essential for diagnosing and managing various blood-related disorders.

The Mean Corpuscular Volume test measures the average size of your red blood cells, which carry oxygen through your body. This test tells whether your RBCs are of average size and volume or whether they are bigger or smaller.

An MCH test measures the average amount of hemoglobin in a single red blood cell (RBC). Hemoglobin is an iron-containing protein in RBCs, and its major function is to transport oxygen from the lungs to all body parts. This test provides information about how much oxygen is being delivered to the body by a certain number of RBCs.

An MCHC test measures the average amount of hemoglobin in a given volume of RBCs. MCHC is calculated by dividing the amount of hemoglobin by hematocrit (volume of blood made up of RBCs) and then multiplying it by 100. 

An MPV test measures the average size of the platelets in your blood. Platelets are disk-shaped tiny cells originating from large cells known as megakaryocytes, which are found in the bone marrow. After the platelets are formed, they are released into the blood circulation. Their average life span is 7-10 days. 

Platelets help stop bleeding whenever there is an injury or trauma to a tissue or blood vessel by adhering and accumulating at the injury site, and by releasing chemical compounds that stimulate the gathering of more platelets. After these steps, a loose platelet plug is formed at the site of injury, and this process is known as primary hemostasis. These activated platelets support the coagulation pathway that involves a series of steps including the sequential activation of clotting factors; this process is known as secondary hemostasis. After this, there is a formation of fibrin strands that form a mesh incorporated into and around the platelet plug. This mesh strengthens and stabilizes the blood clot so that it remains in place until the injury heals. After healing, other factors come into play and break the clot down so that it gets removed. In case the platelets are not sufficient in number or are not functioning properly, a stable clot might not form. These unstable clots can result in an increased risk of excessive bleeding. 

The PDW test reflects variability in platelet size, and is considered a marker of platelet function and activation (clot formation in case of an injury). This marker can give you additional information about your platelets and the cause of a high or low platelet count. Larger platelets are usually younger platelets that have been recently released from the bone marrow, while smaller platelets may be older and have been in circulation for a few days. Higher PDW values reflect a larger range of platelet size, which may result from increased activation, destruction and consumption of platelets.

The RDW CV test which is part of red cell indices, helps identify characteristics of red blood cells. RDW (red cell distribution width) measures the variations in the sizes of red blood cells, indicating how much they differ from each other in a blood sample. RDW is expressed as RDW-CV, a coefficient of variation. A higher RDW may suggest more variation in red cell sizes, while a lower RDW indicates more uniform red cell sizes.

The Absolute Leucocyte Count test measures the total number of white blood cells (leucocytes) in the given volume of blood. It examines different types of white blood cells such as neutrophils, lymphocytes, monocytes, basophils and eosinophils. These cells tell about the status of the immune system and its ability to fight off infections and other conditions like inflammation, allergies, bone marrow disorders etc.

This further contains

• Absolute Monocyte Count
• Absolute Eosinophil Count
• Absolute Neutrophil Count
• Absolute Basophil Count
• Absolute Lymphocyte Count

The Cholesterol - LDL test measures the concentration of low-density lipoprotein (LDL) cholesterol in the blood. LDL cholesterol plays an important role in your body. It carries cholesterol from your liver to other parts of the body where it's needed for things like building cell walls and making hormones. However, it is often referred to as "bad" cholesterol because when present in excess in your blood, it can stick to your blood vessel walls leading to the formation of plaque, making them narrow and less flexible. When this happens, it's harder for the blood to flow, which can lead to heart problems, like heart attacks and strokes. By measuring LDL cholesterol levels, your doctor can assess your risk of developing cardiovascular diseases and can recommend appropriate preventive or treatment strategies.

The Triglycerides test measures the amount of triglycerides in the blood and helps evaluate your risk of developing cardiovascular diseases. Triglycerides are a type of fat (lipid) that your body uses as a source of energy. When you consume more calories than your body needs, the excess calories are converted into triglycerides and stored in fat cells for later use. High triglyceride levels can contribute to the hardening and narrowing of arteries, increasing the risk of heart attack, stroke, and other related conditions. 

The Cholesterol - Total test measures the total amount of cholesterol (fats) in your blood. Cholesterol is mainly synthesized in the liver and partially in the intestines. It acts as a building block for cell membranes, is a precursor to vital hormones, and helps produce bile acids that help digest fats. Cholesterol is transported through the blood as lipoproteins: low-density lipoprotein (LDL) and high-density lipoprotein (HDL). An optimal amount of these proteins is necessary for proper body functioning.

The Cholesterol - HDL test measures the concentration of high-density lipoprotein (HDL) cholesterol in the blood. HDL cholesterol plays a crucial role in maintaining cardiovascular health, as it helps transport excess low-density lipoprotein (LDL) cholesterol from the bloodstream back to the liver for excretion. This process prevents plaque buildup on the blood vessel walls, which can cause them to become narrow and less flexible. Higher HDL cholesterol levels are generally associated with a lower risk of heart problems, such as heart attacks and strokes. By measuring HDL cholesterol levels, your doctor can assess your risk of developing cardiovascular diseases and recommend appropriate preventive or treatment strategies, including lifestyle modifications and medications.

The Very Low Density Lipoprotein test measures the concentration of very-low-density lipoprotein (VLDL) cholesterol in the blood. VLDL cholesterol plays a vital role in the body's metabolic processes. It is produced by the liver and is used to transport triglycerides, a type of fat, from the liver to various tissues throughout the body, where they are either utilized for energy or stored for later use. Though VLDL cholesterol is essential for the body's normal functioning, it is harmful if present in excess amounts. By measuring VLDL cholesterol levels, your doctor can assess your risk of developing cardiovascular diseases and recommend appropriate preventive or treatment strategies.

The Total Cholesterol/HDL Cholesterol Ratio test measures the ratio of total cholesterol and high-density lipoprotein (HDL)/good cholesterol in your blood which is a significant indicator of cardiovascular health. This ratio is calculated by dividing the total cholesterol by the HDL number. A high ratio indicates a higher amount of 'bad' cholesterol relative to 'good' cholesterol, implying a higher risk of developing heart disease. Conversely, a lower ratio implies a higher amount of 'good' cholesterol relative to 'bad' cholesterol, indicating a lower risk.

An LDL/HDL Ratio test measures the ratio of low-density lipoproteins (LDL) to high-density lipoproteins (HDL) in your blood. These two types of lipoproteins carry cholesterol throughout the body. LDL, often referred to as the 'bad' cholesterol, carries cholesterol to the cells that need it. However, if there is too much LDL cholesterol in the blood, it can combine with other substances and form plaque in the arteries, leading to cardiovascular diseases. On the other hand, HDL, often referred to as the 'good' cholesterol, helps remove other forms of cholesterol, including LDL, from the bloodstream. It transports cholesterol back to the liver, where it is broken down and eliminated from the body, thus reducing the risk of cholesterol buildup and heart disease. The LDL/HDL ratio is a significant indicator of cardiovascular health. A high ratio indicates a higher amount of 'bad' cholesterol relative to 'good' cholesterol, implying a higher risk of developing heart disease. Conversely, a lower ratio implies a higher amount of 'good' cholesterol relative to 'bad' cholesterol, indicating a lower risk.

The Non HDL Cholesterol test looks for the “bad” cholesterol particles that are likely to contribute to heart problems. These bad particles include LDL (low-density lipoprotein) cholesterol, VLDL (very-low-density lipoprotein) cholesterol, and remnants of other cholesterol-carrying molecules. Cholesterol is a waxy substance that circulates in your bloodstream and is essential for various bodily functions. However, too much of “bad” types of cholesterol can build up in your arteries and increase the risk of heart conditions. LDL and VLDL cholesterol particles are often referred to as the "bad" cholesterol because they can stick to the walls of your arteries and form plaque, narrowing the arteries and restricting blood flow to your heart. By measuring non-HDL cholesterol, your doctor can assess your risk of heart disease and determine if any interventions or lifestyle changes are needed to protect your heart.

The Urobilinogen test measures the amount of urobilinogen present in the urine. Urobilinogen is a substance formed from the breakdown of bilirubin, a by-product of old red blood cells processed by the liver. This test plays a key role in assessing liver function and detecting liver diseases.

Under normal circumstances, the liver converts bilirubin into urobilinogen. Some of this urobilinogen is reabsorbed into the blood, excreted by the kidneys, and then eliminated from the body through urine. However, when liver function is impaired, the amount of urobilinogen in the urine can change. Hence, the Urobilinogen test serves as an important indicator of abnormalities such as liver disease or blockage of the bile ducts.

The Ketone test measures the presence of ketone bodies in the urine, which are metabolic byproducts produced when the body breaks down fat for energy in the absence of sufficient carbohydrates. This process, known as ketosis, typically occurs during states such as prolonged fasting, strict low-carbohydrate diets, or in certain medical conditions like uncontrolled diabetes mellitus, particularly type 1 diabetes. In diabetes, for instance, the test can help identify diabetic ketoacidosis (DKA), a serious complication characterized by high levels of ketones that can lead to an acid-base imbalance in the blood. The presence of ketones in the urine can be an important marker for monitoring metabolic states and managing conditions that affect blood sugar levels.

The Nitrite test measures the presence of nitrites in the urine sample. Nitrites are chemicals formed by the conversion of nitrates by certain bacteria. Under normal conditions, urine does not contain nitrites. However, when bacteria that cause urinary tract infections (UTIs) are present, they convert nitrates (which are normally found in the urine) into nitrites. Thus, the presence of nitrites in urine is an indication of a bacterial infection, making the Nitrite test a key tool in diagnosing UTIs.

The urine colour test primarily measures the concentration and colour of urine to provide insights into an individual’s  overall health. It assesses hydration status, with clear to light yellow urine indicating good hydration and darker shades suggesting dehydration. It can also detect urinary tract infections (UTIs) through unusual colours like cloudy or reddish urine, signaling the presence of blood or pus. Abnormal urine colours, such as dark brown or amber, may indicate liver conditions like hepatitis or cirrhosis, while pink, red, or brown urine can reveal the presence of blood, signaling kidney issues, trauma, or potential malignancies. The test can reflect dietary influences and supplement intake, with certain foods and vitamins causing colour changes. It can also highlight metabolic disorders, such as porphyria, which may cause purple urine. Additionally, medication effects and potential exposure to toxins can be inferred from changes in urine colour, making this test a comprehensive indicator of overall health and potential underlying conditions.

The urine appearance test measures:

Colour: The urine colour indicates the presence of substances like bilirubin, blood, or medications in the urine, providing clues about liver function, hydration levels, or underlying health issues.

Clarity: The urine clarity assesses the transparency of urine, which can reveal the presence of cells, proteins, or other particles that may indicate infections or kidney disease.

Odor: The urine odor detects abnormal smells that may indicate infections or metabolic disorders affecting the urinary system.

By examining these aspects, doctors can gain insights into hydration status, kidney function, and potential health conditions affecting the urinary tract. This comprehensive evaluation aids in timely diagnosis and management of potential urinary tract problems. 

The urine Specific Gravity test measures the concentration of solutes in the urine, reflecting the kidneys' ability to concentrate or dilute the urine in response to varying hydration levels. By comparing the density of urine to that of water, the test provides insights into the balance of fluids and substances like salts, waste products, and other solutes. This test is important because it helps diagnose and monitor various medical conditions, including dehydration, kidney disease, diabetes insipidus, and other disorders affecting kidney function, enabling timely and appropriate medical interventions.

The pus cells test measures the presence and quantity of pus cells in urine samples. This test helps identify urinary tract infections (UTIs) and other inflammatory conditions of the urinary tract. Doctors perform this test to promptly diagnose and manage urinary tract-related disorders, ensuring timely treatment and management.

The Epithelial Cell test measures the presence and quantity of epithelial cells shed into the urine. This test helps doctors understand urinary tract health by identifying abnormalities such as infections, inflammation, or damage to kidney tubules. Different types of epithelial cells in urine, including squamous, transitional, and renal tubular epithelial cells, provide specific insights into the nature and location of urinary tract issues. This test aids in diagnosing conditions affecting the urinary system and guides appropriate treatment strategies based on the findings.

The urinary cast test measures the presence, and quantity of casts in a urine sample. These casts are cylindrical structures formed from coagulated proteins and cells within the kidney's tubules. By identifying and quantifying the different types of casts, such as red blood cell casts, white blood cell casts, granular casts, and hyaline casts, the test provides valuable insights into kidney health. The presence of specific types of casts can indicate underlying kidney conditions, such as glomerulonephritis, kidney infections, acute tubular necrosis, and chronic kidney disease. This test helps doctors diagnose, monitor, and manage kidney-related issues, guiding appropriate medical interventions and treatments.

The Crystals test measures the presence, type, and quantity of crystals in a urine sample. Crystals can form from various salts and minerals in the urine, and their identification helps diagnose underlying conditions such as kidney stones, urinary tract infections, or metabolic disorders. The test provides insights into potential urinary tract issues by detecting specific types of crystals, such as calcium oxalate, uric acid, or struvite crystals. By analyzing the crystals, doctors can determine the severity of the condition, monitor the effectiveness of treatment, and guide preventive measures to maintain optimal urinary tract health.

The Protein Urine test detects the presence of proteins in the urine sample. Essential proteins are typically retained in the blood by healthy kidneys, but their presence in urine can indicate kidney damage or dysfunction. Conditions like diabetes, hypertension, and certain kidney diseases can cause increased protein leakage into the urine. This test is crucial for assessing kidney health and detecting abnormalities that may require further investigation or intervention.

The Ph for Urine primarily measures the acidity or alkalinity of urine by assessing the balance of hydrogen ions in the urine. It provides insights into an individual’s metabolic and kidney function, with acidic urine suggesting conditions like metabolic or respiratory acidosis, and alkaline urine indicating potential metabolic or respiratory alkalosis. The test can also reflect dietary influences, such as high protein diets may lead to acidic urine, while fruit-rich diets may result in alkaline urine. Abnormal pH levels can indicate conditions such as urinary tract infections, kidney stones, and certain metabolic disorders. Additionally, the test helps to monitor the impact of medications and supplements on urine pH, making it a valuable tool for comprehensive health assessment and diagnosis.

The Urine Glucose test measures the presence or absence of glucose in the urine sample. Normally, glucose is filtered out by the kidneys and reabsorbed into the blood, so it should not be detectable in the urine. When glucose appears in the urine, it indicates that blood glucose levels may be elevated beyond the kidneys' reabsorption capacity. 

Urine glucose is a useful test to check how well your body is managing glucose levels and kidney function. It helps diagnose and monitor diabetes, provides insight into blood sugar control, and can indicate potential issues with kidney function.

The urine yeast test measures the presence of yeast cells in the urine sample. The presence of yeast cells can indicate an infection or an imbalance in the urinary tract's natural microbial environment. Yeast is a type of fungus that naturally resides in small amounts on the skin, in the mouth, and in the intestines. However, when it overgrows, it can cause infections, such as yeast infections in the urinary tract which require medical attention. Therefore this test is crucial for identifying fungal infections, particularly those caused by Candida species, and plays a vital role in guiding appropriate treatment strategies.

The Red Blood Cells test measures the presence and amount of red blood cells (RBCs) in a urine sample. The primary purpose of the test is to detect hematuria, a condition characterized by the presence of blood in the urine. Hematuria can be either visible (gross hematuria) or invisible to the naked eye (microscopic hematuria), and the RBC Urine Test is capable of detecting both. It serves as an early indicator of various underlying health conditions ranging from urinary tract infections (UTIs), kidney stones, and kidney disease, to more serious conditions such as bladder cancer or trauma to the urinary tract. Early identification of hematuria through the RBC Urine Test can prompt timely treatment and management of these conditions, which can significantly improve patient outcomes and prevent complications. 

The Leucocyte Esterase test measures the presence of leukocyte esterase (an enzyme released by white blood cells) in urine samples, which are typically present when there is an infection or inflammation in the urinary tract. Common conditions associated with elevated leukocyte esterase levels include urinary tract infections (UTIs), kidney infections (pyelonephritis), and interstitial cystitis. When the body's immune system detects pathogens such as bacteria, it sends white blood cells to the affected area to combat the infection, leading to an increase in leukocyte esterase levels in the urine. Thus, the Leucocyte Esterase test serves as a marker for these underlying issues ensuring early detection and appropriate treatment.

The Blood test measures the presence of blood in the urine sample, indicating potential issues within the urinary system or kidneys. This test is crucial for diagnosing conditions such as hematuria,  urinary tract infections (UTIs), kidney stones, kidney disease, or even certain cancers that can cause bleeding in the urinary tract.

Depending on whether the blood is visible to the naked eye (macroscopic hematuria) or only detectable under a microscope (microscopic hematuria), doctors can assess the severity and potential causes of the bleeding. By analyzing the presence of blood in the urine sample, doctors can determine the appropriate course of treatment and management, ensuring timely intervention to address underlying health concerns affecting urinary tract and kidney function.

The Bilirubin test measures the levels of bilirubin present in the urine. Bilirubin is a by-product of the breakdown of old red blood cells, processed by the liver. This test is crucial in assessing liver function and detecting liver diseases.

Normally, the liver converts bilirubin into a form that can be excreted into bile and eventually eliminated from the body. When liver function is impaired, the amount of bilirubin in the urine can change, serving as an important indicator of abnormalities such as liver disease or bile duct blockage.

The Bacteria test measures the presence and amount of bacteria in the urine. Normally, urine is sterile, but the presence of bacteria indicates an infection in the urinary system. This test helps diagnose UTIs, bladder infections, and other related conditions, guiding appropriate treatment plans.

Gamma-Glutamyl Transferase (GGT) is an enzyme found in various organs, with the highest concentration in the liver. Usually, this enzyme is present in low levels in the blood. However, when there is liver damage or disease, GGT is released into the bloodstream, causing an increase in GGT levels. In addition to the liver, GGT can also be elevated in conditions affecting the bile ducts or the pancreas. It is usually, the first liver enzyme to rise in the blood when there is any damage or obstruction in the bile duct, making it one of the most sensitive liver enzyme tests for detecting bile duct problems.

An SGPT test measures the amount of ALT or SGPT enzyme in your blood. ALT is most abundantly found in the liver but is also present in smaller amounts in other organs like the kidneys, heart, and muscles. Its primary function is to convert food into energy. It also speeds up chemical reactions in the body. These chemical reactions include the production of bile and substances that help your blood clot, break down food and toxins, and fight off an infection.

Elevated levels of ALT in the blood may indicate liver damage or injury. When the liver cells are damaged, they release ALT into the bloodstream, causing an increase in ALT levels. Therefore, the SGPT/ALT test is primarily used to assess the liver's health and to detect liver-related problems such as hepatitis, fatty liver disease, cirrhosis, or other liver disorders.

An Alkaline Phosphatase (ALP) test measures the quantity of ALP enzyme present throughout the body. The main sources of this enzyme are the liver and bones. It exists in different forms depending on where it originates, such as liver ALP, bone ALP, and intestinal ALP. In the liver, it is found on the edges of the cells that join together to form bile ducts. 

ALP levels can be increased during pregnancy as it is found in the placenta of pregnant women. It is also higher in children because their bones are in the growth phase. ALP is often high during growth spurts (a short period when an individual experiences quick physical growth in height and body weight).

An SGOT test measures the levels of serum glutamic-oxaloacetic transaminase (SGOT), also known as aspartate aminotransferase (AST), an enzyme produced by the liver. SGOT is present in most body cells, most abundantly in the liver and heart. The primary function of this enzyme is to convert food into glycogen (a form of glucose), which is stored in the cells, primarily the liver. The body uses this glycogen to generate energy for various body functions.

The Protein Total, Serum test measures the amount of proteins in the body. Proteins are known as the building blocks of all cells and tissues. They play a crucial role in the growth and development of most of your organs and in making enzymes and hormones. There are two types of proteins found in the body, namely albumin and globulin. About 60% of the total protein is made up of albumin, which is produced by the liver. It helps to carry small molecules such as hormones, minerals, and medicines throughout the body. It also serves as a source of amino acids for tissue metabolism. On the other hand, globulin is a group of proteins that are made by the liver and the immune system. They play an important role in liver functioning, blood clotting, and fighting off infections.

This further contains

• Albumin/Globulin Ratio, Serum
• Protein Total
• Serum Albumin
• Globulin, Serum

The Bilirubin (Total, Direct and Indirect) test measures the level of three forms of bilirubin such as total bilirubin, direct (conjugated bilirubin), and indirect (unconjugated) bilirubin in the blood. Total bilirubin represents the sum of direct and indirect bilirubin. Direct bilirubin is the water-soluble form of bilirubin that has been processed by the liver via a conjugation process with glucuronic acid and is ready to be excreted into the bile ducts and ultimately into the intestines. Indirect bilirubin is the water-insoluble form of bilirubin that has not yet been processed by the liver and is bound to albumin in the blood. It is formed in the spleen and liver during the breakdown of hemoglobin from old or damaged red blood cells and cannot be excreted directly by the liver. Instead, it is transported to the liver, where it undergoes conjugation to become direct bilirubin. 

Getting tested with the Bilirubin (Total, Direct and Indirect) test provides valuable information into various aspects of liver function, bile duct health, and the body’s ability to break down and eliminate bilirubin.

This further contains

• Bilirubin Direct
• Bilirubin Total
• Bilirubin Indirect

The Thyroxine - Total test measures both the bound and unbound/free form of thyroxine (T4) hormone in the blood. T4 exists in the blood in two forms: bound (attached to proteins) and free (not attached to proteins). Most of the T4 circulating in the blood is bound to proteins and only a small part is free. It is necessary to maintain a fine balance of these forms to ensure the proper functioning of the body.

The Triiodothyronine Total test measures triiodothyronine, also known as T3, hormone that is produced by the thyroid gland. T3 hormone plays an important role in regulating the body's metabolism, energy levels, and growth & development. It exists in the blood in two forms: free T3 and bound T3. Free T3 is not bound to proteins in the blood and is the active form of T3. Whereas, bound T3 is bound to proteins, such as albumin and thyroid hormone binding globulin (THBG), which prevent it from entering the body tissues.

The TSH (Thyroid Stimulating Hormone) Ultrasensitive test measures the levels of TSH hormone in the blood. TSH is produced by the pituitary gland located in the brain. Its function is to stimulate and regulate the functioning of the thyroid gland. It signals the thyroid gland to increase or decrease the production of thyroid hormones T3 and T4 (essential for regulating our body’s metabolism, temperature, heart rate, and growth) when their levels are low or high, respectively. Therefore, when the levels of T3 & T4 decrease, the pituitary gland is stimulated to release TSH. This high TSH level, in turn, stimulates the thyroid gland to release more thyroid hormones (T3 & T4); the vice-versa happens when the levels of thyroid hormones increase.

The Serum Creatinine test measures the level of creatinine in the blood. Creatinine is a byproduct of muscles’ wear and tear during energy production. The kidneys remove it from the body by filtering it from the blood and releasing it into the urine. Therefore, blood creatinine levels indicate how well the kidneys are functioning in filtering and removing waste products from the blood. Generally, higher creatinine levels in the blood may indicate reduced kidney function, while lower levels may suggest decreased muscle mass.

An Uric Acid test determines the level of uric acid in your body. Uric acid is a nitrogenous compound produced by the metabolic breakdown of purine. Purines are present as nitrogenous bases in the DNA and are also found in food like red meat and seafood.

Most uric acid dissolves in the blood and goes into your kidneys. From there, it passes through your body via the urine. Decreased elimination of uric acid is often a result of impaired kidney function due to kidney disease. In many cases, the exact cause of excess uric acid is unknown. Doctors seldom need to test for low levels of uric acid.

The Blood Urea Nitrogen test measures the levels of urea nitrogen in the blood. Blood urea is a waste product that is formed in the liver when you eat food and the protein is metabolized into amino acids. This process leads to the production of ammonia that is further converted into urea. Both ammonia and urea are nitrogenous compounds. Your liver releases urea into the blood which is then carried out to the kidneys. In the kidneys, urea is filtered from the blood and flushed out of the body via urine. This is a continuous process, so a small amount of urea nitrogen always remains in the blood.

In the case of a kidney or liver disease, there is a change in the amount of urea present in the blood. If your liver produces urea in an increased amount or if there is any problem in kidney functioning, there might be difficulty in filtering out the waste products from the blood, which can result in increased urea levels in the blood.

The BUN/Creatinine Ratio test helps compare the levels of blood urea nitrogen to that of creatinine in your body. Urea is a waste product that is formed in the liver when you eat protein, which is then metabolized into amino acids. This process leads to the production of ammonia that is further converted into urea. Later, the urea is passed out of your body through the urine. On the other hand, creatinine is a byproduct produced by muscles during energy production. Therefore, the more muscle you have, the more creatinine your body produces. The kidneys remove both the urea and creatinine via urine, and this test determines how well your kidneys are functioning.

The Blood Urea test measures the level of urea in the blood. Urea is a byproduct of protein metabolism. Proteins you consume in your diet are digested and converted into amino acids, which are then utilized by the body. This metabolic process produces a toxic byproduct known as ammonia. Ammonia is then rapidly converted into urea by your liver. Urea is comparatively less toxic than ammonia and is transported to the kidneys via the blood. The kidneys then filter it out through the urine. This process continues and the body keeps producing and eliminating urea, maintaining its low and steady levels in the blood.

The Sodium test measures the amount of sodium in your body. Sodium is present in all body fluids and is found in the highest concentration in the extracellular fluid. The body absorbs the required amount of sodium through dietary salts, and the kidneys eliminate the remaining sodium. The body keeps your blood sodium within a regular and steady range by following three mechanisms:

• By producing hormones that control the elimination of sodium through urine, such as natriuretic peptides and aldosterone.

• By producing hormones that prevent water loss, such as antidiuretic hormone (ADH).

• By controlling thirst (an increase in blood sodium level can make you thirsty and cause you to drink water, returning your sodium to normal).

These mechanisms regulate the amount of water and sodium in the body and control blood pressure by keeping the amount of water in check. When the sodium level in the blood changes, the water content in your body changes. These changes can be associated with dehydration, edema, and changes in blood pressure.

The Chloride test measures the amount of chloride in your body. Chloride is present in all body fluids and is found in the highest concentration in the blood and extracellular fluid (fluid present outside the cells). The body gets most of the chloride through dietary salt (sodium chloride or NaCl) and a small amount through other food items. The required amount of chloride is absorbed in the body and the excess amount is excreted by the kidneys through urine. When the chloride is combined with sodium it is mostly found in nature as salt. Chloride generally increases or decreases in direct relationship to sodium but may also change without any changes in sodium levels when there are problems with the body's pH. Usually, the normal blood chloride level remains steady with a slight fall after meals (because the stomach produces hydrochloric acid using chloride from the blood after we eat food).

The Potassium test measures the levels of potassium in your body. Potassium is one of the key electrolytes that helps in the functioning of the kidneys, heart, nerves, and muscles. It also balances the effect of sodium and helps keep your blood pressure normal. The body absorbs the required amount of potassium from the dietary sources and eliminates the remaining quantity through urine. Potassium level is typically maintained by the hormone aldosterone. Aldosterone acts on the nephrons present in the kidneys and activates the sodium-potassium pump that helps the body reabsorb sodium and excrete potassium. This aids in maintaining a regular and steady potassium level in the blood.

The Microalbumin / Creatinine Ratio test compares the level of albumin and creatinine excretion in your urine primarily used to assess kidney function, specifically regarding the kidneys' ability to filter small amounts of protein (albumin) from the blood into the urine. 

The ratio of microalbumin to creatinine in your urine sample provides a more accurate assessment of kidney function by accounting for variations in urine concentration. It is typically calculated by dividing the amounts of albumin & creatinine in the urine, both measured in milligrams. This helps to standardize the results, as the concentration of creatinine in urine can vary depending on factors like hydration levels.

Elevated levels of the Microalbumin / Creatinine Ratio indicate increased urinary excretion of albumin, which can be an early sign of kidney damage that needs medical intervention.

The Urinary Creatinine test measures the levels of creatinine in the urine. Creatinine is a byproduct of muscles’ wear and tear during energy production. The kidneys remove it from the body by filtering it from the blood and releasing it into the urine. Therefore, urine creatinine levels can be an indicator of how well the kidneys are working. This test is also useful for diagnosing or detecting kidney diseases and other conditions affecting your kidneys.

The Microalbumin test measures the smallest amount of albumin present in your urine, serving as an indicator of kidney health, especially in individuals with conditions such as diabetes or hypertension. It plays a crucial role in identifying diabetic individuals who are at risk of developing chronic kidney disease. It also aids early detection, monitoring, and management of kidney disease and associated complications, enabling doctors to intervene promptly and implement measures to slow its progression.