Pre-Marital Health Checkup for Men

An MCHC test measures the average amount of hemoglobin in a given volume of RBCs. MCHC is calculated by dividing the amount of hemoglobin by hematocrit (volume of blood made up of RBCs) and then multiplying it by 100. 

An MPV test measures the average size of the platelets in your blood. Platelets are disk-shaped tiny cells originating from large cells known as megakaryocytes, which are found in the bone marrow. After the platelets are formed, they are released into the blood circulation. Their average life span is 7-10 days. 

Platelets help stop bleeding whenever there is an injury or trauma to a tissue or blood vessel by adhering and accumulating at the injury site, and by releasing chemical compounds that stimulate the gathering of more platelets. After these steps, a loose platelet plug is formed at the site of injury, and this process is known as primary hemostasis. These activated platelets support the coagulation pathway that involves a series of steps including the sequential activation of clotting factors; this process is known as secondary hemostasis. After this, there is a formation of fibrin strands that form a mesh incorporated into and around the platelet plug. This mesh strengthens and stabilizes the blood clot so that it remains in place until the injury heals. After healing, other factors come into play and break the clot down so that it gets removed. In case the platelets are not sufficient in number or are not functioning properly, a stable clot might not form. These unstable clots can result in an increased risk of excessive bleeding. 

The PDW test reflects variability in platelet size, and is considered a marker of platelet function and activation (clot formation in case of an injury). This marker can give you additional information about your platelets and the cause of a high or low platelet count. Larger platelets are usually younger platelets that have been recently released from the bone marrow, while smaller platelets may be older and have been in circulation for a few days. Higher PDW values reflect a larger range of platelet size, which may result from increased activation, destruction and consumption of platelets.

The RDW CV test which is part of red cell indices, helps identify characteristics of red blood cells. RDW (red cell distribution width) measures the variations in the sizes of red blood cells, indicating how much they differ from each other in a blood sample. RDW is expressed as RDW-CV, a coefficient of variation. A higher RDW may suggest more variation in red cell sizes, while a lower RDW indicates more uniform red cell sizes.

The Red Blood Cell Count test measures the total number of red blood cells in your blood. RBCs are the most abundant cells in the blood with an average lifespan of 120 days. These cells are produced in the bone marrow and destroyed in the spleen or liver. Their primary function is to help carry oxygen from the lungs to different body parts. The normal range of RBC count can vary depending on age, gender, and the equipment and methods used for testing.

The Absolute Leucocyte Count test measures the total number of white blood cells (leucocytes) in the given volume of blood. It examines different types of white blood cells such as neutrophils, lymphocytes, monocytes, basophils and eosinophils. These cells tell about the status of the immune system and its ability to fight off infections and other conditions like inflammation, allergies, bone marrow disorders etc.

This further contains

• Absolute Eosinophil Count
• Absolute Neutrophil Count
• Absolute Basophil Count
• Absolute Lymphocyte Count
• Absolute Monocyte Count

An Hb (Hemoglobin) test measures the concentration of hemoglobin protein in your blood. Hemoglobin is made up of iron and globulin proteins. It is an essential part of RBCs and is critical for oxygen transfer from the lungs to all body tissues. Most blood cells, including RBCs, are produced regularly in your bone marrow. The Hb test is a fundamental part of a complete blood count (CBC) and is used to monitor blood health, diagnose various blood disorders, and assess your response to treatments if needed.

The Platelet Count test measures the average number of platelets in the blood. Platelets are disk-shaped tiny cells originating from large cells known as megakaryocytes, which are found in the bone marrow. After the platelets are formed, they are released into the blood circulation. Their average life span is 7-10 days. 

Platelets help stop the bleeding, whenever there is an injury or trauma to a tissue or blood vessel, by adhering and accumulating at the injury site and releasing chemical compounds that stimulate the gathering of more platelets. A loose platelet plug is formed at the site of injury and this process is known as primary hemostasis. These activated platelets support the coagulation pathway that involves a series of steps, including the sequential activation of clotting factors; this process is known as secondary hemostasis. After this step, there is a formation of fibrin strands that form a mesh incorporated into and around the platelet plug. This mesh strengthens and stabilizes the blood clot so that it remains in place until the injury heals. After healing, other factors come into play and break the clot down so that it gets removed. In case the platelets are not sufficient in number or not functioning properly, a stable clot might not form. These unstable clots can result in an increased risk of excessive bleeding. 

The Total Leukocyte Count test measures the numbers of all types of leukocytes, namely neutrophil, lymphocyte, monocyte, eosinophil, and basophil, in your blood. Leukocytes or WBCs are an essential part of our immune system. These cells are produced in the bone marrow and defend the body against infections and diseases. Each type of WBC plays a unique role to protect against infections and is present in different numbers.

The Hematocrit test measures the proportion of red blood cells (RBCs) in your blood as a percentage of the total blood volume. It is a crucial part of a complete blood count (CBC) and helps in assessing your blood health. RBCs are responsible for carrying oxygen from the lungs to different parts of the body. The hematocrit test provides valuable information about your blood's oxygen-carrying capacity.

Higher-than-normal amounts of RBCs produced by the bone marrow can cause the hematocrit to increase, leading to increased blood density and slow blood flow. On the other hand, lower-than-normal hematocrit can be caused by low production of RBCs, reduced lifespan of RBCs in circulation, or excessive bleeding, leading to a reduced amount of oxygen being transported by RBCs. Monitoring your hematocrit levels is essential for diagnosing and managing various blood-related disorders.

The Mean Corpuscular Volume test measures the average size of your red blood cells, which carry oxygen through your body. This test tells whether your RBCs are of average size and volume or whether they are bigger or smaller.

An MCH test measures the average amount of hemoglobin in a single red blood cell (RBC). Hemoglobin is an iron-containing protein in RBCs, and its major function is to transport oxygen from the lungs to all body parts. This test provides information about how much oxygen is being delivered to the body by a certain number of RBCs.

There are five types of WBCs: neutrophils, lymphocytes, monocytes, eosinophils, and basophils. A Differential Leukocyte Count test measures the percentage of each type of WBC in the blood. Leukocytes or WBCs are produced in the bone marrow and defend the body against infections and diseases. Each type of WBC plays a unique role to protect against infections and is present in different numbers.

This further contains

• Differential Basophil Count
• Differential Neutrophil Count
• Differential Lymphocyte Count
• Differential Monocyte Count
• Differential Eosinophil Count

The urine yeast test measures the presence of yeast cells in the urine sample. The presence of yeast cells can indicate an infection or an imbalance in the urinary tract's natural microbial environment. Yeast is a type of fungus that naturally resides in small amounts on the skin, in the mouth, and in the intestines. However, when it overgrows, it can cause infections, such as yeast infections in the urinary tract which require medical attention. Therefore this test is crucial for identifying fungal infections, particularly those caused by Candida species, and plays a vital role in guiding appropriate treatment strategies.

The pus cells test measures the presence and quantity of pus cells in urine samples. This test helps identify urinary tract infections (UTIs) and other inflammatory conditions of the urinary tract. Doctors perform this test to promptly diagnose and manage urinary tract-related disorders, ensuring timely treatment and management.

The Red Blood Cells test measures the presence and amount of red blood cells (RBCs) in a urine sample. The primary purpose of the test is to detect hematuria, a condition characterized by the presence of blood in the urine. Hematuria can be either visible (gross hematuria) or invisible to the naked eye (microscopic hematuria), and the RBC Urine Test is capable of detecting both. It serves as an early indicator of various underlying health conditions ranging from urinary tract infections (UTIs), kidney stones, and kidney disease, to more serious conditions such as bladder cancer or trauma to the urinary tract. Early identification of hematuria through the RBC Urine Test can prompt timely treatment and management of these conditions, which can significantly improve patient outcomes and prevent complications. 

The Leucocyte Esterase test measures the presence of leukocyte esterase (an enzyme released by white blood cells) in urine samples, which are typically present when there is an infection or inflammation in the urinary tract. Common conditions associated with elevated leukocyte esterase levels include urinary tract infections (UTIs), kidney infections (pyelonephritis), and interstitial cystitis. When the body's immune system detects pathogens such as bacteria, it sends white blood cells to the affected area to combat the infection, leading to an increase in leukocyte esterase levels in the urine. Thus, the Leucocyte Esterase test serves as a marker for these underlying issues ensuring early detection and appropriate treatment.

The Blood test measures the presence of blood in the urine sample, indicating potential issues within the urinary system or kidneys. This test is crucial for diagnosing conditions such as hematuria,  urinary tract infections (UTIs), kidney stones, kidney disease, or even certain cancers that can cause bleeding in the urinary tract.

Depending on whether the blood is visible to the naked eye (macroscopic hematuria) or only detectable under a microscope (microscopic hematuria), doctors can assess the severity and potential causes of the bleeding. By analyzing the presence of blood in the urine sample, doctors can determine the appropriate course of treatment and management, ensuring timely intervention to address underlying health concerns affecting urinary tract and kidney function.

The Bacteria test measures the presence and amount of bacteria in the urine. Normally, urine is sterile, but the presence of bacteria indicates an infection in the urinary system. This test helps diagnose UTIs, bladder infections, and other related conditions, guiding appropriate treatment plans.

The Bilirubin test measures the levels of bilirubin present in the urine. Bilirubin is a by-product of the breakdown of old red blood cells, processed by the liver. This test is crucial in assessing liver function and detecting liver diseases.

Normally, the liver converts bilirubin into a form that can be excreted into bile and eventually eliminated from the body. When liver function is impaired, the amount of bilirubin in the urine can change, serving as an important indicator of abnormalities such as liver disease or bile duct blockage.

The Urobilinogen test measures the amount of urobilinogen present in the urine. Urobilinogen is a substance formed from the breakdown of bilirubin, a by-product of old red blood cells processed by the liver. This test plays a key role in assessing liver function and detecting liver diseases.

Under normal circumstances, the liver converts bilirubin into urobilinogen. Some of this urobilinogen is reabsorbed into the blood, excreted by the kidneys, and then eliminated from the body through urine. However, when liver function is impaired, the amount of urobilinogen in the urine can change. Hence, the Urobilinogen test serves as an important indicator of abnormalities such as liver disease or blockage of the bile ducts.

The Ketone test measures the presence of ketone bodies in the urine, which are metabolic byproducts produced when the body breaks down fat for energy in the absence of sufficient carbohydrates. This process, known as ketosis, typically occurs during states such as prolonged fasting, strict low-carbohydrate diets, or in certain medical conditions like uncontrolled diabetes mellitus, particularly type 1 diabetes. In diabetes, for instance, the test can help identify diabetic ketoacidosis (DKA), a serious complication characterized by high levels of ketones that can lead to an acid-base imbalance in the blood. The presence of ketones in the urine can be an important marker for monitoring metabolic states and managing conditions that affect blood sugar levels.

The Nitrite test measures the presence of nitrites in the urine sample. Nitrites are chemicals formed by the conversion of nitrates by certain bacteria. Under normal conditions, urine does not contain nitrites. However, when bacteria that cause urinary tract infections (UTIs) are present, they convert nitrates (which are normally found in the urine) into nitrites. Thus, the presence of nitrites in urine is an indication of a bacterial infection, making the Nitrite test a key tool in diagnosing UTIs.

The urine colour test primarily measures the concentration and colour of urine to provide insights into an individual’s  overall health. It assesses hydration status, with clear to light yellow urine indicating good hydration and darker shades suggesting dehydration. It can also detect urinary tract infections (UTIs) through unusual colours like cloudy or reddish urine, signaling the presence of blood or pus. Abnormal urine colours, such as dark brown or amber, may indicate liver conditions like hepatitis or cirrhosis, while pink, red, or brown urine can reveal the presence of blood, signaling kidney issues, trauma, or potential malignancies. The test can reflect dietary influences and supplement intake, with certain foods and vitamins causing colour changes. It can also highlight metabolic disorders, such as porphyria, which may cause purple urine. Additionally, medication effects and potential exposure to toxins can be inferred from changes in urine colour, making this test a comprehensive indicator of overall health and potential underlying conditions.

The urine appearance test measures:

Colour: The urine colour indicates the presence of substances like bilirubin, blood, or medications in the urine, providing clues about liver function, hydration levels, or underlying health issues.

Clarity: The urine clarity assesses the transparency of urine, which can reveal the presence of cells, proteins, or other particles that may indicate infections or kidney disease.

Odor: The urine odor detects abnormal smells that may indicate infections or metabolic disorders affecting the urinary system.

By examining these aspects, doctors can gain insights into hydration status, kidney function, and potential health conditions affecting the urinary tract. This comprehensive evaluation aids in timely diagnosis and management of potential urinary tract problems. 

The urine Specific Gravity test measures the concentration of solutes in the urine, reflecting the kidneys' ability to concentrate or dilute the urine in response to varying hydration levels. By comparing the density of urine to that of water, the test provides insights into the balance of fluids and substances like salts, waste products, and other solutes. This test is important because it helps diagnose and monitor various medical conditions, including dehydration, kidney disease, diabetes insipidus, and other disorders affecting kidney function, enabling timely and appropriate medical interventions.

The Epithelial Cell test measures the presence and quantity of epithelial cells shed into the urine. This test helps doctors understand urinary tract health by identifying abnormalities such as infections, inflammation, or damage to kidney tubules. Different types of epithelial cells in urine, including squamous, transitional, and renal tubular epithelial cells, provide specific insights into the nature and location of urinary tract issues. This test aids in diagnosing conditions affecting the urinary system and guides appropriate treatment strategies based on the findings.

The urinary cast test measures the presence, and quantity of casts in a urine sample. These casts are cylindrical structures formed from coagulated proteins and cells within the kidney's tubules. By identifying and quantifying the different types of casts, such as red blood cell casts, white blood cell casts, granular casts, and hyaline casts, the test provides valuable insights into kidney health. The presence of specific types of casts can indicate underlying kidney conditions, such as glomerulonephritis, kidney infections, acute tubular necrosis, and chronic kidney disease. This test helps doctors diagnose, monitor, and manage kidney-related issues, guiding appropriate medical interventions and treatments.

The Crystals test measures the presence, type, and quantity of crystals in a urine sample. Crystals can form from various salts and minerals in the urine, and their identification helps diagnose underlying conditions such as kidney stones, urinary tract infections, or metabolic disorders. The test provides insights into potential urinary tract issues by detecting specific types of crystals, such as calcium oxalate, uric acid, or struvite crystals. By analyzing the crystals, doctors can determine the severity of the condition, monitor the effectiveness of treatment, and guide preventive measures to maintain optimal urinary tract health.

The Protein Urine test detects the presence of proteins in the urine sample. Essential proteins are typically retained in the blood by healthy kidneys, but their presence in urine can indicate kidney damage or dysfunction. Conditions like diabetes, hypertension, and certain kidney diseases can cause increased protein leakage into the urine. This test is crucial for assessing kidney health and detecting abnormalities that may require further investigation or intervention.

The Ph for Urine primarily measures the acidity or alkalinity of urine by assessing the balance of hydrogen ions in the urine. It provides insights into an individual’s metabolic and kidney function, with acidic urine suggesting conditions like metabolic or respiratory acidosis, and alkaline urine indicating potential metabolic or respiratory alkalosis. The test can also reflect dietary influences, such as high protein diets may lead to acidic urine, while fruit-rich diets may result in alkaline urine. Abnormal pH levels can indicate conditions such as urinary tract infections, kidney stones, and certain metabolic disorders. Additionally, the test helps to monitor the impact of medications and supplements on urine pH, making it a valuable tool for comprehensive health assessment and diagnosis.

The Urine Glucose test measures the presence or absence of glucose in the urine sample. Normally, glucose is filtered out by the kidneys and reabsorbed into the blood, so it should not be detectable in the urine. When glucose appears in the urine, it indicates that blood glucose levels may be elevated beyond the kidneys' reabsorption capacity. 

Urine glucose is a useful test to check how well your body is managing glucose levels and kidney function. It helps diagnose and monitor diabetes, provides insight into blood sugar control, and can indicate potential issues with kidney function.